Galvanised 12mm Shaft Rowlock and Socket

A galvanised rowlock with 12mm diameter shaft and matching socket plate
SKU AP-ROW12
In stock
Description

Single galvanised rowlock with 12mm / 1/2inch shaft.

Supplied with socket plate

  • Socket plate 43x30mm 
  • Socket plate fixings 4x 4mm 
  • Socket plate fixing centres 30mm x 18mm
  • Rowlock internal diameter 70mm / 2 3/4inch
  • Rowlock opening 63mm / 2 1/2inch
  • Rowlock shaft length: 115mm / 4 1/2inch
More Information
SKUAP-ROW12
Reviews
.
Product Questions (3)
Customer Questions
Hi JamesThey have something like a 70mm inside diameter and the opening is 62mmHope that helpsDavid
loader
Loading...
Hi EleanorThe rowlocks you will want are the nylon gunwhale mounted and they will nee something under the gunwhale to support the load and accept the fixingshttps://www.tridentuk.com/gb/product-rowlock-socket-gunwhale-mounting-al-a-392.htmlhttps://www.tridentuk.com/gb/product-rowlock-nylon-grey-al-a-390.html Our Centre main kit for a GRP boat has everything you need to set your boat up for centre sheeting including resins to bond the new mounting platform in place I hope that helps and I hope all goes well with the new purchaseRegardsDavid
loader
Loading...
Hi RachaelPersonally I would have said the 10mm version is more suitable, best to measure the socket holes in the boat.Most Mirrors were built at home and fitted out by individuals so who knows what could have been put on and who knows what could have been put on over the last 53 following years.RegardsDavid
loader
Loading...
loader
Loading...
loader
Loading...