Pneumatic Trolley Wheel Extra Wide 16" x 6"

Pneumatic Trolley Wheel Extra Wide 16" x 6" is manufactured in the UK
Standard trolley wheel with a larger tyre.
SKU SR-Wheel-TroL
In stock
Description

Extra wide dinghy trolley wheel which uses the same hub as the standard trolley wheel but is fitted with a larger tyre which helps carrying heavier boats and also eases the ride over rough ground and being wider helps over soft sand.
Although the tyre is only 2 inches wider it has a much square profile than a standard trolley wheel so offers much more support.

  • 4 ply tyre 16x6.50-8 NHS (not for highway service)
  • Max Load 620Lbs/280Kgs at 28 PSI/1.9 Bar
  • 8 inch plastic rim (2.50Ax8)
  • Overall diameter of tyre 16 inches
  • Tyre width 6 inches

Fits:-

  • 25mm /1 inch axle. with the bushes in making the hub 67mm wide
  • 35mm/1 3/8 inch axle with the bushes knocked out making the hub 63mm wide

We fit these wheels to our range of heavy duty trolleys, you just need to knock the bushes out. They will work on to our webbing support and our standard trolleys as long as the boat supports aren't set too flat. If you are unsure just ask us.

More Information
SKUSR-Wheel-TroL
Reviews
.
Product Questions (15)
Customer Questions
Hi, The hubs have a plastic bush with a 26mm id and a 35mm od so you may be able to fit a bearing but we have no experience of using them in sand yachts. David
loader
Loading...
Hi JerryOn our trolley and road base they only just fit RegardsDavid
loader
Loading...
Hi RichardYes the price is for eachRegardsDavid
loader
Loading...
Hi NormanIf it does we don't have any 20mm bearings that would fit.The problem with bearings in trolley wheels is they get wet, salty, gritty and then don't last longRegardsDavid Shilling
loader
Loading...
Hi Martin Have add to the product description 4 ply tyre 16x6.50-8 NHS (not for highway service) Max Load 620Lbs/280Kgs at 28 PSI/1.9 Bar RegardsDavid
loader
Loading...
Hi MarkThe 6.50 measurement is possibly a measurement taken when the tyre is flat as inflated it's slightly less than 6 inches. Maybe the tyre treads out at 6.50 when under an amount of load?RegardsDavid
loader
Loading...
Hi Colin, yes the wider pneumatic wheels will fit your Wayfarer Trolley. The wheel itself (the red plastic bit) is the same as the standard pneumatic wheel but the tyre is 2 inches wider totalling 6 inch wide. Hope this helps.Jake
loader
Loading...
Hi, it depends on the geometry of your trolley. The inner hub is the same as the standard trolley wheel but the tyre profile is more square shaped. Nine times out of ten they do fit but if you send us a pic we could confirm. Many thanks
loader
Loading...
Hi Derek It's the 8" https://www.tridentuk.com/gb/product-inner-tube-trtrait.html Why trolley wheels are measured by the overall diameter and normal wheels are measured by the rim size I don't know Regards David
loader
Loading...
Just blow it up more! Regard David
loader
Loading...
Hi Sam These wheels come with 1inch bushes to fit 25mm tube Regards David
loader
Loading...
Hi Raj I would imagine they will fit just fine however you could probably work it out with a tape measure The hubs are 70mm wide and the tyres are 150mm wide and you will need more than 150mm gap for the wheels to fit between frame and mudguard of the roadbase Regards David
loader
Loading...
Hi Mike We have nothing that small. All I can think of is putting a 25mm steel tube over which has about 20mm internal diameter Regards David
loader
Loading...
#N/A
loader
Loading...
Hi Alex The two widths of 16 inch trolley wheels have a very similar sized hub but the 6inch wide hub has removable bushes fitted with a wider tyre. Regards David
loader
Loading...
loader
Loading...
loader
Loading...