Harken Hoister Storage System - 4 Point Raised Storage - 8:1 Ratio

Harken Hoister garage storage system with 4 lifting points and an 8:1 ratio mechanical advantage . Store everything from canoes and kayaks to bikes, ladders and roof racks at roof height.

Designed for one-person operation. Raise and lower with a single control rope. Patented design lifts and lowers loads evenly, regardless of weight distribution. Self-locking safety cleat grips instantly if the rope is accidentally released. Stainless steel hardware, double-braid rope for strength, durability, long life. Everything is included for easy installation.

Easy to Use

• One person can easily raise and lower with a single control rope.
• Easy to Install
• Complete kit
• Safe Self-locking - Safety cleat grips instantly if rope is accidentally released
• Lifts Evenly - From 34Kg to 91Kg
• The four point storage hoister lifts your load using two straps and four attachment points in the ceiling.

How do I tie the system off when I'm finished using it?
You don't have to! The beauty of this system is the patented stainless steel self-locking safety cleat that automatically locks and holds the load once you release the rope. This makes your job easier, and more importantly safer.

What can I store with a Harken Hoister?
Harken Storage systems efficiently store small boats, rowing sculls, truck caps, convertible hardtops, unneeded van seats, canoes, train sets, ski equipment and cartop carriers, and many other things that fit in its weight range. There are plenty of offbeat ways to use these systems too. All it takes is some imagination!

How Can I Lift That Much Weight?
We use the mechanical advantage provided by a block and tackle system.


How Difficult Is It To Install A Harken Hoister?
For the Bike/Utility lift all you need to do is install the single screw eye (included) into your truss or garage rafter.
The 4-Point Storage System comes complete with a well-illustrated instruction manual.

Do I Need To Buy Any Additional Parts For Installation?
The 4-Point Hoister Storage Systems come with all the mounting hardware. However, you might want to buy two 2" x 6" x 6' boards to help align the lift directly over the object you're lifting.

Can Hoister Systems Be Installed Directly Into A Ceiling's Truss or Rafters?
Yes, if your trusses/rafters line up with where you want your Hoister mounted, it can be installed directly into ceiling trusses. You may need to run a short cross beam between trusses in order to mount the organizer. If necessary, you can install the two 2" x 6" x 6' boards to align the system so you can lift the object straight off your vehicle without the system pulling from side-to-side.

I Have A Roof Rack That Is Heavier On One Side Than The Other. Will The Harken Hoister Lift The Load Evenly?
Yes. Because of the system's patented special design, the Hoister will lift your load evenly, no matter how the weight is distributed.

DO NOT use Harken Equipment for Human suspension.