Vernier Adjuster

Vernier or Multi hole adjuster with 17 holes, supplied with a 10mm pin at the narrow lower end and a 12mm pin for the wider adjusting part.
Note: Depending on your rigging it's possible to make the shroud captive by adding another 12mm pin at the upper inside hole to prevent the eye in the shroud from escaping, particularly useful if you change your rig settings on the water.

• Material: 316 Stainless Steel
• Pin Diameter: 5mm
• Adjustment Range: 64mm
• Increments: 3mm
• Internal Width: 9mm
• Overall length: 98mm
• Weight: 41g