Webbing Support Launching Trolley - Upto 15ft6
Main image Click to view image in fullscreen 
![]()
This webbing support trolley is for boats up to 15ft6 or 4.7m long and particularly suited for boats with a round bottomed hull.
SKU TRTRA155WLT
€348.10
Excl. Tax: €348.10
Excl. Tax:
Excl. Tax:
In stock
Description
This webbing support trolley is for boats up to 15ft6 or 4.7m long and particularly suited for round hulls. It uses a 5 inch webbing strap to support your boat in the middle and a standard 'D' rubber support at the front.
Advantages of Webbing Support
- Greater support for the boat, because the webbing support is 5 inches wide (130mm).
- On round hulls the load is evenly distributed across the boat.
Suited for
- Laser 2000
- 470
- Any dinghy or small boat upto 15ft6 long or 4.7m (Please note if you are putting an outboard motor on the back you will need a longer trolley).
Specification
- A-frame galvanised steel construction, providing long lasting care free use.
- 5 inch webbing support strap for the centre of the boat.
- 'D' rubber support at the bow.
- 16 inch pneumatic tyres, with plastic hubs, totally corrosion resistance.
- High front handle to make handling easier.
- Supplied flat packed to allow shipping and supplied with tools and instructions (allow 15 minutes for assembly).
- For dinghies and small boats upto 15ft6 long or 4.7m.
Delivered Free to most of the Mainland UK.
Add a nose wheel and bracket to make handling the trolley easier (it saves the need of lifting the front of the trolley).
| SKU | TRTRA155WLT |
|---|
Reviews
.
Product Questions (4)
Customer Questions
Hi Gary,Our trolley should fit on a Laser 2000 roadbase however as I haven't tried it myself I can't confirm how well and if it all clips together like the originalIt may also depend on what roadbase you have as 'standard' in my experience doesn't mean much in the dinghy world.The rear dimensions of the trolley are in the product pictures and the measurement from trolley axle to locating pin is 2625mmI hope that helpsDavid
Hi RobertThe trolley for an RS200 is based on our 135 unit (to fit boats up to 13' 6") We have a webbing and cradle version available although the cradle version isn't online at the momentRS200 Cradle trolley £320135 Webbing trolley £250Both inc vat and delivery mainland UK ex highlands The webbing is possibly more robust than the fibreglass cradle if abused, When wet to webbing dries out easier not trapping moisture next to the hull, fluted rubber on the cradle help to not trap water.The boat can slip round on the webbing more easily than the cradle. The locating hole is 30mm and all the trolley measurements are on the extra images of the product, on a windows machine hover your mouse over the image to bring the menu up and click on the box with an arrow coming out of it to expand the picture and make the numbers legible. I'm not sure what you mean by 4cms height sorry RegardsDavid
Hi Ginny You will want a much smaller trolley than that One of the below, probably the first one https://www.tridentuk.com/gb/product-standard-launching-trolley-upto-11ft-trtra115lt.html or https://www.tridentuk.com/gb/product-standard-launching-trolley-upto-12ft6-trtra125lt.html You can double check by finding the boats balance point and measuring from there to the bow and getting a trolley slightly longer as it's good to have a little nose weight on the trolley. You can see the trolley measurements in the images Regards David
Loading...
Loading...