Laser Trolley Gunwale Hung

Laser Trolley Gunwale Hung is manufactured in the UK
Gunwale hung trolley designed specifically for the Laser 1. A-frame galvanised steel construction with foam tyres on non-corrosive plastic wheels.
SKU TRTRA145LTL1
In stock
Description

Gunwale hung trolley designed specifically for the Laser 1. A-frame galvanised steel construction with foam tyres on non-corrosive plastic wheels.

Buy this trolley with our Trident Vario1 EU Road Base Trailer, to give you a Laser Combi Trailer. See the extra images above to get an idea how this trolley fits together.

Features

  • Padded full width axle, cross member, bow and gunwale supports
  • Hot dipped galvanised coating.
  • Gunwale hung support at the axle.
  • Specifically designed for the Laser Sailing Dinghy.
  • Supplied with 14.5 inch puncture proof foam tyres on plastic hubs.
  • Supplied flat packed, with tools for assembly which typically takes 15 minutes.
  • Can be shipped world wide.
  • Fits our Vario Road Base to create a Combination Road Trailer.
More Information
SKUTRTRA145LTL1
Reviews
.
Product Questions (15)
Customer Questions
Hi Peter It is possible but as they are packaged ready for despatch the cost of unpacking one and then repacking is probably about the cost of the wheels. Many thanks David
loader
Loading...
Hi Mike Are the measurements you are asking for in the extra images of the product? Regards David
loader
Loading...
Hi Timo This is a trolley not a trailer so can only be handled around the dinghy park and in and out the water by hand and not behind a car We would need your address and exactly what you want to order to quote a price for shipping something that size to Germany Regards David
loader
Loading...
Hi Michael, We have a Pico trolley https://www.tridentuk.com/gb/laser-pico-launching-trolley-sailing-dinghy-trtra125pico.html The Laser trolley is too long for the Pico. Regards David
loader
Loading...
Hi Philip We need a delivery address to quote and prices vary greatly from place to place Regards David
loader
Loading...
Hi JohnThe trolley has a 30mm round locating hole at the frontRegardsDavid
loader
Loading...
Hi JohnDimensions are 265 X 40 X 30 cms and weighs 28KGThat said if it were going in or on a car I would unpack it as i'd be easier to handle.The side arms are the longest part at 265cms and should go in a car. The cradle/axle assembly wheels, handle and cross member should go in the boot. You can see dimensions of the cradle/axle assembly on the extra images of the productRegardsDavid
loader
Loading...
Hi John, The trolley will fit onto your Mersea roadbase no problem although the locating pin at the front might not match up, in which case you will need to tie the trolley down at the front (you will do this anyway when a boat is on). David
loader
Loading...
Hi Lisa, The length of the trolley is about 2.3m and full detailed measurements are shown in the thumbnail images on the website https://www.tridentuk.com/gb/product-laser-trolley-gunwhale-hung-trtra145ltl1.html Many thanks David
loader
Loading...
Hi AlanOur Vario 1 Road Base will take trolleys designed for boats up to 14' 6" .To help determine if the two will fit in some way we have listed the measurements of the road base or you could look at the extra images of the trolley to see the trolley dimensionshttps://www.tridentuk.com/gb/trident-vario-1-eu-dinghy-road-base-trailer-sailing-trtravrb1.html There have been many different designs of Laser trolleys over the years so difficult for me to say how well it will fit. What I can say is I haven't failed to load a trolley on a road base and the worst that has happened is I've had to take the trolley wheels off and strap the trolley and boat fore and aftI hope that is some helpRegardsDavid 
loader
Loading...
Hi JakeA Laser 1 is sailed single handed and has a hole with a tube in the deck that the mast fits intoA Laser II is a 2 person boat with a stayed mast (has wires holding it up)If you google images for laser 2 regatta you should get a better idea of what you haveRegardsDavid Shilling
loader
Loading...
Hi Andy, the gunwhale supports are 1335mm apart and 325mm above the axle but I'm afraid that I don't know the measurements of the Aero. I hope this helps. David
loader
Loading...
Hi LouisaI'm sorry but I can't answer this as neither of these are our products and I have little knowledge of themRegardsDavid
loader
Loading...
Hi, yes we can ship this item to Portugal. Please could you supply the full delivery address and I will be able to provide you with a Shipping Cost. Many thanks, Kieran Parslow
loader
Loading...
Hi Jake and thanks for your enquiry I will need to get your postcode to get an exact price but it looks like it should cost £31.74 if the Trolley is going to a standard address in Northern Ireland.  If you would like to go ahead with an order either give me a call (01914901736) or you should be able to place it online. RegardsJake
loader
Loading...
loader
Loading...
loader
Loading...