Wayfarer Floorboards MK1A, 2, +S

Hi Simon, the floorboards are designed to fit the Mk1A, Mk2 and Plus S versions of the Wayfarer. Below are the dimensions of the boards: Overall length 2375mm, max width 600mm, cut outs for the turnbutton fixings are 850 and 1490mm from the rear end and 455mm from the centreline edge. Many thanks David Gebhard

Hi TobyThe Wayfarer floor boards are cut out of marine ply then epoxy coated all over including the ends, this is 'belt and braces' but helps give extra longevity. The top side has a non slip paint which has a slight aggregate in it.Boards will be packed in cardboard with particular attention to the corners then usually black wrappedI hope that helpsDavid

Hi MichaelYes we could do a varnished set, we would have to make them up so it could take a while depending on if we have the wood in stock and it would add £30 to the price as a special order.RegardsDavid

Hi Stephen The boards are 9mm thick and if you have any concerns about fit you could make a template in paper and I would check them against ours before we ship themRegardsDavid

Hi Steve The floorboards are 9mm, I'd guess the 12mm space is to aid fitting and removing, if it were too good a fit it would make it really difficult to get the boards in and out Regards David Shilling