9inch Yellow Prop Guard
PropGuard® is a poly-carbonate injection moulded 2 part cage that protects your propeller, and you from your propeller.
PropGuard® is a poly-carbonate injection moulded 2 part cage that protects your propeller, and you from your propeller. The 2 halves bolt onto your engine cavitation plate and skeg and can be fitted with basic tools within 30 minutes.
Lightweight, strong and non corroding the PropGuard®, due to its unique moulded design, limits drag and can even improve acceleration and handling, as well as offering superb protection.
Available in several sizes, this the 9" Yellow model is suitable for most outboard motors from 4-20hp, where the propeller 9" in diameter (not pitch!) or smaller.
For more information and details Click Here
1) To obtain optimal performance out of your motor with the Prop Guard® installed, you may need to change your propeller diameter. For this 9" prop guard, for the best performance you need an 8.5" propeller plus otherwise you may just get the benefits of the protection.
2) The closer the prop blades are to the Prop Guard® rings, it will optimise your performance, handling and will not create a drag. Your motor will also have to be trimmed to a setting of optimal performance.
3) Be sure the Prop Guard® you purchase is the correct size. Place it on your motor with Grip Clamps first and CHECK YOUR CLEARANCES BEFORE DRILLING HOLES AND MOUNTING.