Trident Vario 2 EU Road Base

Trident Vario 2 EU Road Base is manufactured in the UK
Trident Vario 2 Roadbase.
SKU TRTRAVRB2
In stock
Description

This is our new EC compliant Vario 2 road base trailer, designed with over 15 years of experience for carrying dinghy with their trolleys. The road base is suitable for boats up to 5m (16ft 6ins), just roll on your boat with its trolley.

The trailer includes;
• Mast Support bracket, just add a mast support at a size to suit your towing vehicle
• 10 inch road wheels
• Brackets for lighting board
• Lighting board with 6m cable
• Full width rear roller - to make it easier to pull on your boat and trolley
• Adjustable front round locating pin to hold trolley in place
• Tie down anchor points (front and back)
• As standard will take our 115/Mirror to 165 trolleys (excluding our heavy duty trollies)
• Pre drilled to take a jockey wheel, which can be added at time of purchase or later.
• Supplied flat packed so we can easily ship the item
• All tools are included for assembly, which is now quicker and easier.


Important Dimensions


Please note that although our trailers are designed with the intention of been universal, there are many different trolley designs for different types of boats. We suggest that you check to make sure your trolley fits on the road base before purchasing. Normally the important parts are the length of the axle and the position of the trolley wheels. If you have any questions please email or call us. Alternatively why not buy one of our trolleys for a guaranteed great fit.

Distance between the mud guards 1530mm If the outside of your trolley wheels are further apart, your trolley will still fit but you will need to remove the trolley wheels.
Width of the trailer frame 1245mm If the inside of your trolley wheels are closer, then you will need to remove the trolley wheels when you put the boat on the trailer.
Width of the roller 1190mm The distance from the outside of your side arms where they join the axle of your trolley need to be less, otherwise the trolley won't fit.
Locating pin to roller 2820mm This is the maximum distance the locating pin can be set from the aft of the roller

 


Trailer Dimensions and Capacity

Unladen Trailer Weight 76Kg Includes 1.1m mast support and excludes launching trolley.
Gross Trailer Weight 400Kg Maximum Total weight of trailer including load.
Maximum Payload 324Kg This is the maximum load that can be carried by the trailer, don't forget to include your trolley into this weight.
Width 1920mm Maximum width of the trailer (this is at the mudguards)
Length (with out lighting board)  3570mm  Length of trailer with lighting board and brackets removed
Length (with lighting board)  4770mm  Length of trailer with lighting board and brackets fitted.
More Information
SKUTRTRAVRB2
Reviews
.
Product Questions (3)
Customer Questions
Hi Hans,Sorry for the delayed reply, I have just found that our original reply bounced back for some reason!? It's no problem shipping a Fireball launching trolley and a Vario 2 roadbase to Belgium but for the courier to give us a cost we need to know the exact delivery address.We currently have stock of a launching trolley and roadbase Many thanksDavid GebhardBest Regards,Team Trident
loader
Loading...
Hi DougWe just spoke about your trailer and good luck with the modificationsRegardsDavid
loader
Loading...
Hi Mark I don't know much about 250 roadbases but possibly better to measure your trolley and compare directly with ours, the maximum measurement from roller to locating pin is:- Vario 1 2620mm Vario 2 2820mm You can see more measurements on the product descriptions Regards David
loader
Loading...
Who Bought This Also Bought
Wayfarer Trolley
£354.00
Tow Ball Coupling For Standard Launching Trolley
£56.00
Nose Wheel Bracket
£12.70
Trident Mast Support 1.45 Metres
£28.65
Trident Mast Support 1.1 Metres
£22.30
Trolley Nose Wheel Puncture Proof Foam Tyre
£57.15
Sliding Jockey Wheel
£29.00
loader
Loading...
loader
Loading...